Rode M3
A versatile condenser mic for studio, stage and location that also runs on a 9 V battery when needed.
Klubijäsenen edut
Lue lisää- Klubihinnat kaikille tuotteille
- Ilmainen pakettiautomaattitoimitus alkaen 150 €
- Voimassa 3 vuotta, jokainen ostos pidentää
- Kuukausittaiset jäsentarjoukset
Liity ilmaiseksi, kun ostoksesi on vähintään 150 €, tai klubikortilla (9,99 €).
4.8
866 arvostelua
GPS Eesti Googlessa
- Rugged metal body
- Built-in capsule shock mount
- High level of RF interference rejection
- Switchable 80Hz-12dB/oct high-pass filter on the body (-10 and -20dB PAD)
- Hardened, rugged mesh head
- Battery status indicator
- 9V battery power, 24 or 48V phantom power
- Windshield, microphone clip and zip pouch included
The RØDE M3 is a versatile condenser microphone designed for use in the studio, on stage and outdoors. It is equally suited to recording guitars, drums and vocals.
With a rugged metal body and a 1/2" condenser capsule with a built-in shock mount, the microphone can be powered by either P48 phantom power or a 9V battery.
A -10dB and -20dB pad, selectable inside the battery compartment, lets you record loud sources such as guitar amps and drums. An 80 Hz high-pass filter, selectable from the power switch, reduces low-frequency sound and handling noise.
| Operating Principle | Pressure Gradient |
| Transducer | Condenser |
| Diaphragm | 0.5" / 12.70 mm |
| Polar Pattern | Cardioid |
| Frequency Range | 40 Hz to 20 kHz |
| Equivalent Noise Level | 21 dB A-weighted |
| Maximum SPL | 142 dB SPL |
| Pad | 10 dB 20 dB |
| Impedance | 200 ohms |
| Sensitivity | -40 dB |
| Power Requirements | 24 V, 48 V |
| Length | 8.86" / 225 mm |
| Diameter | 1.30" / 33 mm |
| Weight | 0.86 lb / 390 g |
- M3 - Versatile end-address condenser microphone
- RM3 - Durable microphone clip
- WSM3
- ZP1 - Padded zip pouch
