Rode AI-1 USB Audio Interface
A USB audio interface that connects a studio mic or instrument to your computer for studio-quality recording.
Klubijäsenen edut
Lue lisää- Klubihinnat kaikille tuotteille
- Ilmainen pakettiautomaattitoimitus alkaen 150 €
- Voimassa 3 vuotta, jokainen ostos pidentää
- Kuukausittaiset jäsentarjoukset
Liity ilmaiseksi, kun ostoksesi on vähintään 150 €, tai klubikortilla (9,99 €).
4.8
866 arvostelua
GPS Eesti Googlessa
Rode AI-1 is a studio-quality audio interface that is ideal for recording vocals, instruments and voice-overs on your Mac or Windows computer. It has one combo XLR-1/4" input with phantom power, two balanced 1/4" monitor outputs, one discrete studio-quality headphone output and level control. It can run in zero-latency mode, which routes the preamp directly to the headphone output for delay-free performance while recording. When headphones are plugged in, the two monitor outputs are muted. To use the monitor outputs, simply unplug the headphones.
The durable aluminium body has a satin black finish and large rubber feet that stop the interface sliding around on your desk. The AI-1 is class compliant and needs no drivers, and its USB-C connector not only connects to your computer but also provides power. The Rode AI-1 comes with a USB cable and an Ableton Live Lite licence.
- Desktop USB audio interface with a low-noise discrete preamp
- Sample rate up to 96 kHz/24-bit
- One combo XLR-1/4" input
- Two balanced 1/4" monitor outputs
- One discrete studio-quality headphone output
- Phantom power for condenser microphones
- Zero-latency monitoring mode
- USB bus powered
- USB Type-C connector for future-proof use
- Durable body with satin black finish
- Class compliant - no drivers needed
- Includes Ableton Live Lite
- USB cable included
AI-1 Audio Interface Specifications
| Computer Connectivity | USB |
| Form Factor | Desktop |
| Simultaneous I/O | 1 x 2 |
| Number of Preamps | 1 |
| Phantom Power | Yes |
| Bit Depth | 24-bit |
| Sample Rates | 44.1 kHz |
| Analogue Inputs | 1 x Neutrik XLR-1/4" combo |
| Analogue Outputs | 2 x 1/4" (impedance balanced) |
| Direct Monitoring | Yes |
| USB | 1 x USB Type C |
| Bus Powered | Yes |
| OS Requirements | Mac OS 10.10 or later |
| Power | USB bus-powered |
| Depth | 100 mm overall (including knobs) |
| Width | 124mm |
| Height | 38mm |
| Weight | 1lb 3.7oz |
Input
XLR/MIC INPUT
| Dynamic Range | 104dBA |
| Equivalent Input Noise @ maximum gain (150 ohm source impedance, 20 Hz–20 kHz, A-weighted) | –128dBA |
| Frequency Response (measured after ADC) | 20Hz – 20kHz better than ±1dB |
| Gain Range | 0dB – >45dB |
| Gain Range | 1.3k Ohms |
INSTRUMENT INPUT
| Dynamic Range | 99dBA |
| Frequency Response (measured after ADC) | 20Hz – 20kHz better than ±1dB |
| Gain Range | 0dB – >45dB |
| Input Impedance | 900k Ohms |
Output
MONITOR OUTPUTS
| Maximum Output Level | -6dBu |
| Frequency Response | 20Hz – 20kHz better than ±1dB |
HEADPHONES
| Maximum output power at 1% THD | 32 Ohms – >210mW |
- Rode AI-1 studio-quality USB audio interface
- USB cable
- Ableton Live Lite registration card
